Electrical Repair Services in Bergen, Norway.

Take A Look At Our Services

The Best Service For All The Electronics
At Your Home Or Work Place

All the support you will ever need, just a call away


We provide the best electronic and electrical technical support and take our job very seriously. We have the best technicians to cater to your every need.


Did you know our services are of the most reasonable price highly professional?

Types Of Electricians

Given below are the different types of electrical technicians we provide.


Commercial Electrician

The job of the commercial electrician is to install and maintain the electrical devices in commercial buildings.

Maintenance Electrician

Maintenance electricians are responsible for the general upkeep of an electrical system of a building, usually large factories.

Domestic Electrician

The domestic electrician is responsible for the wiring, earthing and maintenance of domestic buildings.


How to pick the right plumber in Bergen

Looking for a rørlegger i Bergen? Here are some important steps you should follow in order to find the right one for you.    The first thing you should do is to talk with your closest friends, family members and other people you know, to see if they have any good suggestions regarding a plumber they have used themselves. You should ask them about the way in which the job was done, whether it was completed within the timeframe you agreed upon, and of course, whether they charged a justifiable price which wasn’t too high in relation to the quality – or too low to be credible.    Research: Find the right fit In order for you to make a well-considered choice about what price the market is at today, you should get at least three offers from different plumbers. In other words, you should put out a job listing. Usually, a lot of people will show interest. After you have chosen a list of people who may be the right fit, you can then begin deciding on the one you want to do the work for you.   An effective job listing should specify… 
  1. Cost: Are you going to pay a fixed total price, or by the hour? If you have a big project to complete, the safest way is usually to go for a total price, since you then give an incentive to the plumber to be effective, and not to waste your or their own time. 
  2. Project details: To find the right plumber, you should explain the project in rich details. Be clear about what outcome you want. Using visual tools like pictures and videos will be very helpful. 
  3. Equipment: What kind of standard should the building materials have? And will you or the plumber be the fortunate one to get them?  
  4. Deadline: When should the job be completely done, no excuses? 
  5. Deadline of the job listing: By when should the offer be made to you?
You should also know that the plumbing companies that have received the most positive critique in your local area might be hard to reach by putting out a job listing, since they often already get a lot of projects through word of mouth.    Contact person and severity  As you collect your offers, it’s time to check the plumber’s severity in relation to the work they perform.    One way of doing this is to search the web for their company, so that you can get feedback from people who sought their help. Often, the different websites for job listings also have reviews which anyone can read.    You should be aware of one thing, though: the reviews which companies post on their websites are often chosen specifically because they mention good points about the company, and makes it seem absolutely fantastic. After all, those companies want as many customers as they can get.   If you follow these simple guidelines, you’ll be well on your way to picking the right plumber in Bergen.   

Electricians in Bergen are now giving digital inspection

Digital solutions are being applied to most industries today. This also holds true for electrical companies in Bergen, where a quite recent innovation has taken hold: the digital inspection. In this short article, we will first explain what the manual electrical inspection is, before we explain how the digital version is like.


What is an electrical inspection?

An el-inspection is performed by an electrician who controls your electrical system on an overall level. The el-inspection is a general review of your power meter, cables, power sockets, and different power switches, where small tests are made when there’s a suspicion that something might not be working as it should. The checkup is used to discover big and notable errors, so that the customer can feel safer with regards to fire hazards and power transmission. Power sockets, power switches, connection points, and lamps are also tested. Keep in mind, though, that electrical companies won’t dismantle any other electrical equipment than what they are testing if they don’t see anything suspicious.


In other words: An electrical inspection is a visual checkup with tests and measurements which include a conversation with the house owner or tenant. The electrician also gives general advice about el-safety, excessive voltage protection, extension cords, etc. Then they will give some tips as to what can be improved, if it’s necessary.


During the control, the owner of the house is also offered advice on points which have been accepted as good enough. A typical piece of advice is to limit the use of extension cords if these are to be used as a permanent solution. For equipment which is permanently mounted, for example a TV, fixed sockets should be used. If something unsafe is discovered, this is registered in a clear and concise report. Electrical companies can only recommend improvements, they can’t impose anything. But remember that it’s the house owner’s responsibility that their electrical system is in a state according to regulations.


How is the digital inspection performed?

A digital inspection is different from a manual inspection. In a manual inspection, an electrician comes to your house to check that everything is in order. In a digital inspection, they make you take some pictures of your power meter, extension cords, power sockets, and anything that would be necessary in a normal inspection. You can make the inspection as detailed as you want; for example, you can use a screwdriver to open power sockets in order to give the electrician a more thorough understanding of the state of your electrical system. (Make sure to turn the power off before you do this, in the relevant section of your house.)

Man on a digital inspection witha an electrician

One of the companies in Bergen that is a part of this innovation is Elektriker Bergen, and the CEO André Olsen, says that:

“This way, if you have any doubts about the safety of any electrical part of your house, you can just send in a few pictures to have an electrician look at them.”

In most cases, they will be able to give you immediate advice and offer you a price for fixing what needs to be fixed. And if they need more information before they can do that, they will contact you. It’s as simple as it gets.

Safety Precautions for Electricians

The job of an electrician is far from being an easy one as they tend to go through a whole different process in getting things done. But while doing so, you should also follow a few safety precautions that are meant to take you ahead in the right direction. If you plan to ignore these steps, the outcome might not be a pleasing one, and if you plan to follow the same, then the outcome will definitely be worth it. So choose the right way forward and move ahead to read the following.

The Electrical Code

The purpose of the electrical code is to protect an electrician and keep them safe from electrical installations and equipment. This is a common process, and knowing the code will surely help you make the most of it. Apart from the code, one should also be aware of the rules and regulations and follow the things that need to be followed. In this manner, your work will turn into an effortless one and move ahead to help you get used to a comfortable experience.

Never Touch Someone Who Has Been Electrocuted

Never Touch Someone Who Has Been Electrocuted

Assisting someone who has been electrocuted is more like a reflex action, and at times, we all go ahead to make it happen. But doing so might not end up being the perfect move because a body is a conductor, and by touching them, the current will travel into your body, and you will eventually be in trouble. So in such situations, you need to turn off the primary power source, pick up your phone, and dial 911. Hence, follow these steps and move ahead to get it all going.

Inspect Your Electrical Tools

The different tools you utilize for the process need to be in shape and should have all that it takes to get the job done. But since constant usage plays its part, electrical tools might not always be what you had hoped for. Due to that, you need to hold regular inspections and understand the condition of your tools before going ahead to utilize them. A weekly check-up or a monthly check-up will do the trick, and in case you find something wrong, replace the tool immediately.

Safety Gear

Electricians are supposed to wear the right safety gear before getting into work, and it is an essential requirement for everyone to follow. Even when you feel that it is not required, you need to go ahead and put them on because safety is always a huge matter of concern. So always carry your gear and be ready to make use of the same when the moment arrives. By doing so, your job will be easier, and the tasks can be completed with ease.